Nozzle, WIDE Green HG-2016
(fits Triumph models Serial #14797-present)
Shaft w/ Cam, Spinner Triumph
(fits Triumph models Serial #12657-present) Note:Triumph Model 10501-12656 should upgrade use part #T422300. This includes platter with dual use.
Fitting, Elbow 1/4fptX3/8hb Triumph
Elbow fitting connected to nozzle body for the low gear broadcast nozzle on the Triumph. Only one per machine
PermaGreen® Agitator - Universal Upgrade Kit w/ Cam
(All Triumph Models) The PermaGreen® Agitator Upgrade Kit can be used on Triumphs. Also, fits Lesco push spreaders. This kit is recommended to customers that have old cam, with "D" shaft. This shaft has part of the shaft shaved off to for a "D" at top for old agitator. This kit is recommended to ensure New Agitator seats on shaft properly. This kit will include the PermaGreen® Agitator as well as the Cam & Shaft for the Agitator, along with a wrench to tighten the set screw needed to tighten the Agitator on the Shaft. This kit includes the following part: 1 qty T422400-Permagreen Agitator Kit-The PermaGreen® Agitator Upgrade Kit Also, fits Lesco push spreaders 1 qty T100103-PermaGreen Agitator Cam Similar kits to consider are: T000685-Agitator Shaft + PermaGreen Kit (Recommended for customers that want to update spinner, shaft block, and agitator.) T000690-Agitator Block & Shaft Kit (Recommended if needed to replace spinner shaft and shaft block assembly ONLY) T000695-Agitator Upgrade KIT Complete (Recommended for customers that want to update spinner, platter, shaft block, cam, and agitator.)
Tank Lid
(fits all Triumph models) (2) are used per machines.
Agitator Upgrade KIT Complete-2012 to present
This kit can be used for ALL Triumph owned machines 2012 to present. This kit is good for replacing most main spreading parts. Kit includes step by step instructions and includes the following part: 1 qty T422100-Straight Fin Spinner Platter 1 qty T100103-Permagreen Agitator Cam & Shaft 1 qty T422400-Permagreen Agitator Kit-The PermaGreen® Agitator Upgrade Kit can be used on older model Magnum and Triumphs. Also, fits Lesco push spreaders 1 qty T651969-Shaft Block with Striker 1 qty T422310 B-Spinner Shaft Complete 1 qty T101615-Hopper Guide Tool Similar kits to consider are: T000685-Agitator Shaft + PermaGreen Kit T000690-Agitator Block & Shaft Kit T000697-Universal Agitator Upgrade KIT w/Cam
Fitting, 1/4 Mnbt
(fits all Triumph models) Spray Shield kits including this part is T000317-SprayShield Kit.
Agitator Cam & Shaft
Cam & Shaft for the PermaGreen® Triumph Agitator is located directly underneath the hopper of the Triumph and the shaft will go up through the bottom of the hopper and connect with the PermaGreen® Agitator.
BOWL POLY
(fits Triumph models Serial #14797 to present) This part is one of the replacement parts in T466690-1/4" FPT Poly Strainer Assembly. This is the bowl that holds that strainer in place on the Strainer Assembly.
Pressure Cap, 8 PSI
(all Triumph models)
Gasket, Viton 2016-Used in T466690
(fits Triumph models Serial #14797-present) This part is a gasket that is in part #T466690-1/4" FPT Poly Strainer Assembly. Seals the bowl and Top of Strainer assembly to ensure particle do not pass thru plumbing system.
Rod End, Female 3/16
(fits all Triumph models) This Rod End is used on the on the ends of the hopper cable as linkage pieces to hopper plate and hopper open/close lever
Clip, Push on Retaining 1/2 Triumph
(fits all Triumph models) This push on retainer is located on the left hand side of the bottom of the fertilizer lever. It helps hold the fertilizer lever and deflector lever securely onto the handlebar housing.
PP- 1/4mpt elbow 1/4fpt street L
(fits Triumph serial # 17000 - Present) This part is a part of the Suction Strainer part of the plumbing system. The female end of the elbow is assembled on the strainer assembly. The male end of the elbow is assembled to a 1/4" pipe nipple. Then, the nipple is assembled to the ball valve with yellow lever.
Super Duty Shaft Block Assembly
Super Duty Block set is the last block set you will ever order. Block connects the Spinner shaft to the gearbox. This brass block has a striker to vibrate the hood. This keeps fertilizer from building up on the hood. Best Block you will ever own. Part included on this assembly 2 qty P645240-1/4-20x1 Bolt 4 qty R651480-Lock Washer 1/4 2 qty T645845-1/4-20 x 1/4-Cone Point set screw 2 qty T645243-1/4-20 x 1-1/2 bolt 1 qty T651937-Shaker Striker 1 qty T651936-Back-up Block Plate
SCREEN 40M
(fits Triumph serial # 15500 - Present) This screen is used in Part #T466690. This screen keep particles from traveling thru plumbing systems. Important to clean regularly.
Spray Valve Kit--- READ DESCRIPTION
( Triumph models years 2010-2014 Old A1A-B1B) This spray valve kit was used on the original Triumph Models. This kit includes two different tee fittings. A1A model Triumph used the 1/4 Tee fitting, while the B1B models used the 3/8 Tee fittings. This is a Universal kit that can Only be used on 2010 to 2014 Models of Triumphs. This kit includes the following parts: 1 qty P205010-Spray Valve 1 qty P454005-3/8 mpt x 1/4 fpt Reducing Bushing 1 qty P454050-1/4mpt x 1/4 x 1/4 hb nylon tee 1 qty P000425-Tee Fitting 1/4" mpt x 3/8 T 2 qty P205020-Spring 3" ONLY USED ON Triumph 2010 to 2014 Models
Hose Clamp, #38
(all Triumph models) This clamp is used on 3/8 hose to secure hose barb fitting to hose.
Hose, 3/8 id
(all Triumph models) SOLD BY FOOT (QTY 1 EQUALS 1 FOOT)
Hopper Slide Plate (Triumph)
(fits Triumph models Serial #12657-present)
Nozzle, Triumph High Gear Broadcast -Green,
(fits Triumph model serial#10501-15499) High Gear Broadcast/Wide Nozzle. It is a stainless steel nozzle with a green stripe. It is non-self centering so it will be used in the white nozzle caps
Hose, 1/4 id
(all Triumph models) SOLD BY FOOT (QTY 1 EQUALS 1 FOOT)
Valve, Drain Triumph
(all Triumph models) This valve is used on all triumph machines to drain tanks and fill squeeze and spray bottles. Round lever designed to not open valve by mistake. Fill and drain when needed.
Agitator Block & Shaft Kit
(All Triumph Models) This kit is to replace the Block and Spinner shaft. This kit has the following part number: 1 qty T651969-Shaft Block with Striker 1 qty T422310-B-Spinner Shaft Complete Similar kits to consider are: T000685-Agitator Shaft + PermaGreen® Kit T000695-Agitator Upgrade Kit Complete T000697-Universal Agitator Upgrade KIT w/Cam
Nozzle, WIDE White LG, 2016
(fits Triumph models Serial #14797-present)
Spray Tank Agitator Kit (2015+ Triumphs)
(Triumph models Serial #14151 to present) Tank Agitators for the PermaGreen® Triumph. The kit will come with two agitators, one for each tank. These are screwed into the return flow opening in the bottom of each tank and increase the liquid agitation by creating a jet at the bottom of the tank. They're great for using with products that are more viscous and might settle at the bottom of the tanks. These can be used on any Triumph 2015 model year and newer.
Hopper Screen (Triumph, 2015-present)
(fits Triumph models Serial #14151-present)
Nozzle, Triumph Self Centering Cap-Yellow
(fits Triumph models Serial #14797-present)
Sprayer/Spreader