Quick Order
Transaxle, Triumph-Kit (UPS Signature Required)
(fits all Triumph models) This kit includes Transaxle with heat shield to protect the transaxle. Dual pulleys and drum hub attach for breaking system. Brake Covers and Tire hubs with lug nuts to attach Rims for easy assembly. Lastly, hardware nuts, bolts, and washers to attached the transaxle with easy schematic instructions to simplify assembly. Listed below is a parts breakdown: Parts pre-assembled on Transaxle: 1-P653601-V-Pulley, A3.5 x 3/4" 1-R651628-3/16 x 1-1/2 Machine Key (assembled with pulley) 1-T654935-Hub Drum Assembly (Check kit T654930 for reference) 2-T651610-1/2" External Retaining Ring (Secure T654935) 2-T651615-1/2" Flat Washer (Secure T654935) 1-T101770-Shift Arm 1-P210110-Bolt, 1/4-28 x 1/2 Hardened Parts attached to transaxle be removed used to mounted on machine 4-U650691-Bolt, 5/16-18 x 3 4-R651214-Lock Nut, 5/16-18 4-651422-Washer 5/16 4-R651482-Lock Washer, 5/16 4-R650122-Bolt, 5/16-18 x 1 2-T650850-Washer Bag/Box Parts to assembly on transaxle: 2-P654725-Hub w/Drum 4-R651404-Lug Nut 1/2 4-T651406-1/2 x 1" Lug Nut 5-P651512-Washer, 1" x 18 ga 2-P651705-E Clip, 1" 2-P651640-Key, 1/4 x 1-1/2 1-P653601-V-Pulley, A3.50 x 3/4" 1-T210111-Transaxle Vent 2-T654283-Black Hub Cap 1" 2-R347041-Wire Tire 8" 2-T101708-Top Brake Cover 2-T654053-Brake Cover Assembly Instructions to assemble on machine
3rd Hole Cable w/ Plastic Lever Triumph
(all Triumph models) This controls 3rd hole slide plate on all Triumph models and includes plastic lever, black plastic cable/lever housing, gray rate adjuster and cable. Metal lever version is available as part number T654056 which is an upgraded version.
Washer, 1" x 18 ga .048
(fits all Triumph and Magnum models) Used on rear sulky axle of Triumph and front axle of Magnum
Triumph 3" Spring (Spray Valve, Deflector, Throttle)
(fits all Magnum models) (fits all Triumph models) 3" Spray Valve Spring is used to help close the main spray valve on the Triumph. Also used on deflector. All Triumph models use this spring for Throttle spring. Magnum models used this spring to pull the main spray valve.
Spinner Gearbox w/ Pulley (Triumph)
(fits all Triumph models) This is the gearbox that is used on all Triumphs. This part engages the spinner shaft and impeller to spread granular product. This gearbox kit comes with the parts show below: 1 qty gearbox 1 qty T653710-3"OD 1/2 bore w/2 set screws 4 qty R651206-Lock Nut 1/4-20 1 qty T210165-Gearbox Heat Shield 6" 4 qty P650105-Set Screw 1/4-20 x 1 ss
Lever, Throttle
(fits all Triumph and Magnum models) Located on top right handlebar on the both the Triumph and Magnum models. This lever will pulley back on the throttle cable that is connected to the Triumph and Magnum engine.
Front Brake Cable #2 (of 2) Assembly (Triumph)
(fits all Triumph models) This is the Front Brake Cable #2 (of 2) Assembly for the Triumph. You will receive the Front Brake Cable #2, Brake Holder, Brake Pins, and Brake Band. This assembly is located underneath the green hood and will help apply braking pressure to the transaxle.
Shift Cable Clamp
(all Triumph models) The Cable Clamp for the Shift Cable is used on all Triumph models. It is located near the bottom of the shift cable before it connects with the shift arm on the transaxle. It helps keep the shift cable secure while shifting and is bolted onto the frame.
Smart Steer Cable
(fits all Triumph models) Attaches just under handle bar and connects to front smart steer hub band.
Knob, Fert Rate Kit
(all Triumph models) This knob upgrade kit had a new and improved know that can be locked in place by a nylon locknut. This kit includes the following parts: 1 qty T422937 New, Knob Fert Rate 1 qty T645945 1/4-20 Zinc Locknut 1 qty T645940 1/4-20x1-1/4 Zinc Carriage Bolt Instructions for this kit, give illustrations of how to install new knob.
3rd Hopper Hole Assembly Cable w/ Metal Lever (Triumph)
(all Triumph models) This 3rd hopper hole cable assembly for the PermaGreen® Triumph will include a metal lever for greater durability, lever housing, gray plastic rate adjuster, and cable. This is available for all Triumph models. The following part number are used in the upgrade: 1 qty T654325-Plain Grip 1 qty T101504-3rd hole Cable Lever 4 qty P651230-5/8 Nylon Washer 1 qty T654220-3rd Hole Cable with plastic lever
Spinner Gearbox Hood Bearing (Triumph)
This bearing goes over the shaft coming up from the Triumph Spinner Gearbox that comes up through hole in the middle of the green plastic hood piece.
